Tally Genicom Matrix Printer - Manual (Page 110)

Variable Line Spacing n/180 Inch or n/216 Inch
ESC 3
Variable Line Spacing n/60 Inch or n/72 Inch ESC A
Variable Line Spacing n/360 Inch ESC +
Data Structure ASCII ESC "3" <n> set n/180 inch line spacing
➊
hex. 1B 33 <n> set n/216 inch line spacing
dec. 27 51 <n>
ASCII ESC "A" <n> set n/60 inch line spacing
➋
hex. 1B 41 <n> set n/72 inch line spacing
dec. 27 65 <n>
ASCII ESC "+" <n> set n/360 inch line spacing
➌
hex. 1B 2B <n>
dec. 27 43 <n>
Description
➊
When the printer receives this code sequence it sets the line feed pitch to n ⁄
180 inches
(24 needle version) or to n ⁄
216 inches (9 needle version). The value specified for n
must be in the range of 0 to 255.
➋
This code sequence sets the line feed pitch to n ⁄
60 inch (24 needle version) or to n ⁄
72 in-
ches (9 needle version). The value specified for n must be in the range of 1 to 127.
➌
This code sequence sets the line feed pitch to n ⁄
360 inch (24 needle version). The
9 needle printer ignores this sequence.
The value specified for n must be in the range of 1 to 127.
Once line spacing has been set with one of these sequences, an appropriate line feed is
made whenever code LF is received until line spacing is changed with one of the code
sequences ESC 0, ESC 1, ESC 2, ESC 3 n, ESC + n or ESC A n.
Line Spacing 27