Toshiba SUPER MODULAR MULTI HFC R-410A - Manual (Page 20)

20
3. Cooling/heating capacity characteristics
Cooling capacity calculation method:
Required cooling capacity = cooling capacity x factor (, , , , 
*1 ) kW
 Indoor air wet bulb temperature vs. capacity correction value
Indoor air wet bulb temperature (°C)
 Outdoor air dry bulb temperature vs. capacity correction value
 Air flow variation ratio of indoor unit vs. capacity correction (for ducted units only)
Outdoor air dry bulb temperature (°C)
Air flow variation ratio (%)
*1 Outdoor unit capacity correction factor when total capacity of the indoor units is not equal to the outdoor unit capacity.
Capacity corr
ection value
Capacity corr
ection value
Capacity corr
ection value