UTStarcom 860 - Manual (Page 31)

61
Adapting Digits
If you regularly have trouble getting VoiceSignal to recognize
numbers, try adapting digit dialing to your voice. Adapting can
improve the accuracy of digit recognition, especially for
people with strong regional accents. Adaptation involves
recording several sequences of four digits each.
The recording process takes about a minute.
To Adapt Digit Dialing:
1 Start VOICESIGNAL.
2 Press SETTINGS then select DIGIT DIALING
e ADAPT DIGITS.
To Reset Digit Adaptation:
1 Start VOICESIGNAL.
2
Press SETTINGS then select DIGIT DIALING
e RESET DIGITS.
VoiceSignal
60
VoiceSignal
Selecting Your Location For Digit Dialing
You can usually improve the accuracy of digit dialing by
specifying your current geographical location (for example,
“North America”).
The phone will recognize only numbers that are valid in the
specified location.
To Select Your Location:
1 Start VOICESIGNAL.
2 Press SETTINGS, and then select DIGIT DIALING
e SELECT LOCATION.
3 Choose a location from the list.
You can also select “Automatic” if you want VoiceSignal to
choose a location based on the language setting of the
phone. Select “Other” if your present location is not listed,
or if you want digit dialing to recognize any number
sequence.
• Tips for adapting digit dialing:
- Adapt digits in a quiet place.
- Wait for the beep before starting to speak.
- Speak clearly, and say each digit distinctly.
- If you make a mistake while recording a sequence of
digits, or if there is an unexpected noise that affects
the recording, re-record that sequence.
- Adapt digits only if you are regularly having
problems with digit dialing. Once you adapt, digit
dialing will not work as well for other people using
your phone. (You can always reset digit adaptation
to its original state, as described below.)