UTStarcom 860 - Manual (Page 49)

97
Sounds
Sets Ringers, Tone Length, Volume, and Alerts.
Ringers
To select a ringer type for incoming calls or messages:
Voice Calls
1 Press ‘Menu>5.Settings >1.Sounds>1.Ringers>1.Voice Calls’.
2 Select “Caller ID” or “No Caller ID” then press [OK].
3 Select your desired ringer type then press [SELECT] to
save your selection.
Messages
1 Press ‘Menu>5.Settings>1.Sounds>1.Ringers>2.Messages’.
2 Select “Voicemail”, “Text/Multimedia” or “Web Alerts” and
press [OK].
3 Select your desired ringer type then press [SELECT] to
save your selection.
Settings
96
Settings
Alarm
1 Press ‘Menu>5.Settings>1.Sounds>1.Ringers>3.Alarm’.
2 Select your desired ringer type then press [SELECT] to
save your selection.
Tone Length
To adjust key tone length:
1 Press ‘Menu>5.Settings>1.Sounds>2.Tone Length’.
2
Select “Long” or “Short” then press [OK] to save.
Volume
Controls the Ringer, Earpiece, Key Tones, Power On/Off, and alerts
you to incoming calls in a variety of modes.
Ringer
Controls the Ringer volume and alerts you to incoming calls in the
following modes:
1 Press ‘Menu>5.Settings>1.Sounds>3.Volume>1.Ringer’.
Voice Calls
To move directly to voice call, press [ ] in idle mode.
Select one of the following options:
• High&Vibrate/High/Medium/Low/Escalating/Vibrate/
Ringer Off/Silence All