UTStarcom 860 - Manual (Page 45)

89
Do More
88
Do More
Tools
1 Press ‘Menu>4.Do More>5.Tools’.
1. Select “Get New” then press [OK].
The browser will launch and take you to the “Tools”
download menu.
2. Use the Navigation Key to select a tool you want to
download.
3. From the item information page, select “Buy”.
4. A confirmation page will notify you that the tools have
been purchased. Your new tool will be stored in your
“Tools” folder.
Calendar
1
Press ‘Menu>4.Do More>5.Tools>2.Calendar’.
Add New Event
1 Move the Navigation Key left, right, up or down to choose
a date in the calendar then press [OK] or [VIEW].
If there is no event on selected date, you will see the “Event
Empty” message and then the “Add New Event?” screen.
Title
Use the keypad to input a title then press [SAVE].
Start
Use the Navigation Key to set a time for the event and
press [SAVE] or [OK].
Duration
Select a duration option (None, 30 Minutes, 1 Hour, 2 Hours,
3 Hours, All Day, User Setting) using the Navigation Key.
When the highlighted value is the “User Setting”, press [EDIT]
to edit the user value.
Date
Use the Navigation Key to set a date for the event and
press [SAVE].
Alarm
Select an alert time option (On Time, 5 Min Before, 10 Min
Before, 30 Min Before, 1 Hour Before, User setting, Off) using
the Navigation Key.
When the highlighted value is the “User Setting”, press [EDIT]
to edit the user value.
3 Press [DONE] to save it.
4 The event will be marked on you calendar.
In Duration and Alarm submenus, select User Setting to
set time in xxMin/Hour/Day/Week unit.
You can enter a title of up to 64 characters.
NOTE:
An event in the past cannot be entered; however, you
can enter it if Alarm is Off.
NOTE: