UTStarcom 860 - Manual (Page 55)

109
2 Read the message then press [OK].
3 Select one of the following options:
Voice Dial
Set Active
Allows the user to activate or deactivate voice dial service.
1 Press ‘Menu>5.Settings>5.Initial Setup>7.Voice Dial>
1.Set Active’.
2 Select “Send Key” or “Off” by pressing the Navigation Key
up or down.
3 To save, press [OK].
Voice Settings
1 Press ‘Menu>5.Settings>5.Initial Setup>7.Voice Dial>
2.Voice Settings’.
2 Select one of the following options:
3 To save, press [OK].
Settings
108
Settings
Full/Talk/Hear/Off
1. Digit Dialing/2. Sensitivity/ 3. Choice Lists/4. Sound/
5. About.
Advanced
Set Mode
Selects the Preferred System.
1 Press ‘Menu>5.Settings>6.Advanced>1.Set Mode’.
2 Select “Automatic”, “Home Only” or “Roam Only” with the
Navigation Key.
3 To save, press [OK].
Set NAM
Manually selects a NAM.
Changes the NAM used by the phone when you have multiple
registrations.
1 Press ‘Menu>5.Settings>6.Advanced>2.Set NAM’.
2 Select “NAM1” or “NAM2” with the Navigation Key.
3 To save, press [OK].
• Automatic: The phone will automatically acquire service
according to the PRL.
• Home Only: The Home Only settings shall limit the
phone to Home service.
• Roam Only: The Roam Only settings shall limit the
phone to Roam service.