UTStarcom 860 - Manual (Page 50)

99
Message
Ringer Mode: Volume Off/Level 1 - 5.
Alarm
Ringer Mode: Volume Off/Level 1 - 5.
Earpiece
To adjust earpiece volume:
1 Press ‘Menu>5.Settings>1.Sounds>3.Volume>2.Earpiece’.
2 Adjust the earpiece tone.
3 To save, press [OK].
Key Tones
To adjust keypad tones:
1 Press ‘Menu>5.Settings>1.Sounds>3.Volume>3.Key Tones’.
2 Adjust the keypad tone.
3 To save, press [OK].
Settings
98
Settings
• Level1-5 (MIN- , MAX- )
• Off/Level1-5 (MIN- , MAX- )
Power On/Off
To adjust power on/off tones:
1 Press ‘Menu>5.Settings>1.Sounds>3.Volume>4.Power On/Off’.
2 Select “On” or “Off” then press [OK] to save.
Alerts
Allows you to set an alert sound for the following changes:
Service Change
Alerts the user when leaving a service area and entering a roaming
service area.
1 Press ‘Menu>5.Settings>1.Sounds>4.Alerts>1.Service Change’.
2 Select “On” or “Off” then press [OK] to save.
Minute Beep
Makes a sound every minute of a phone call.
1 Press ‘Menu>5.Settings>1.Sounds>4.Alerts>2.Minute Beep’.
2 Select “On” or “Off” then press [OK] to save.
Call Connect
Notifies you that a call has been successfully placed.
1 Press ‘Menu>5.Settings>1.Sounds>4.Alerts >3.Call Connect’.
2 Select “On” or “Off” then press [OK] to save.