UTStarcom 860 - Manual (Page 58)

115
Taking pictures with your phone’s built-in camera is as simple as
choosing a subject, pointing the lens, and pressing the button.
Take Picture
To get to the camera menu, press [ ] in idle mode.
1 Press ‘Menu>6.Camera>1.Take picture’.
2 Point the camera lens at your subject. You can verify
the picture framing through the main display screen.
3 To take the picture, press [OK] or the Side Camera
button.
4 Press [Save] to save your picture.
Camera
114
Settings
Data-In
Connection
Selects a connection mode based on the phone usage.
1 Press ‘Menu>5.Settings>8.Data-In>1.Connection’.
2 Select one of the following connection modes:
3
To save, press [OK].
Data Speed
To select a connection speed based on phone usage.
1 Press ‘Menu>5.Settings>8.Data-In>2.Data Speed’.
2 Select one of the following connection speeds with the
Navigation Key:
3 To save, press [OK].
• Voice Call: To receive a voice call.
• Data Only: To receive data when connected to PC.
• Fax Only: To function as a fax when connected to PC.
• 19200 bps
• 115200 bps
• 230400 bps
This function is available only when the phone is
connected to the data cable.
NOTE:
If you want to use the fax feature, you should set Data
Speed to 19200 bps.
NOTE:
• By pressing [MENU], the user can choose from the
following options:
1.Quality: Fine/Normal/Economy
2.Multi-Shots: Off/2/3/5
3.Resolution: 160X120/320X240/640X480
4.Self-Timer: Off/5 Secs/10 Secs
5.Contrast: 5 Levels
6.Color Tone: None/Warm/Antique/Cool/Moonlight/
Fog/Negative/Black & White
7.Fun Frame: 5 Fun Frames
• By pressing [OPTIONS], the user can choose
from the following options:
1.Send Message: Go to the Messaging compose
screen.
2.Send Online: Upload pictures saved in your phone
to the Picture Mail Website.