UTStarcom 860 - Manual (Page 47)

93
Do More
92
Do More
Erase All
1 To erase all voice memos, press .
“Erase all voice memos?” will be displayed.
Press [OK] to erase all voice memos.
Notepad
1 Press ‘Menu>4.Do More>5.Tools>5. Notepad’.
If there is no Notepad, you will see the “Notepad Empty” message
and then the “Add New Notepad?” screen.
Add New Notepad
1 Press [OPTIONS], then select “Add New”.
2 Use the keypad to input a notepad then press [SAVE].
Calculator
1 Press ‘Menu>4.Do More>5.Tools>6.Calculator’.
2 Follow the instructions below to calculate (8*6)/4-2.5.
Input 8.
Move the Navigation Key to the left.
Input 6 then press the Navigation Key to the right.
Input 4 then press the Navigation Key down.
Input 2 then press to enter (.).
Press 5.
• By pressing [OPTIONS], the user can choose from the
following options:
1.Add New/2.Edit/3.Erase/4.Erase All
You can store up to 20 notepads.
NOTE:
3 To reset, press [RESET].
Stopwatch
1 Press ‘Menu>4.Do More>5.Tools>7.Stopwatch’.
2 To measure a time period.
1. To start the stopwatch, press [START].
2. To stop the stopwatch, press [STOP].
3. To reset the stopwatch, press [RESET].
3 To time up to five events at once:
1. To start, press [START].
2. To stop a time period and continue measuring
another one, press [CONTINUE].
3. To stop the second and continue measuring the
third one, press [CONTINUE].
4. To measure up to five time periods, repeat the
above steps.
: x, : /, : +, : -, :., : Reset, : =.
'M' icon: icon is displayed when there is saved value in
memory. If the user turns the phone off/on, this icon will
disappear.
NOTE:
• By pressing [OPTIONS], the user can choose from the
following options:
1.+/-: toggling sign
2.M+: Save the value to Memory
3.MR: Retrieve the value in Memory
4.MC: Clear the value in Memory