UTStarcom CDM1450 - Manual (Page 20)

38 39
MAKING A CALL THROUGH
THE CONTACT LIST
CONTACTS
ONE-TOUCH/TWO-TOUCH DIALING
Ideal for frequently dialed numbers, this feature allows entries in your
contact list to be dialed via the keypad with only one or two key presses.
In order for One-Touch/Two-Touch Dialing to properly work, it must be
enabled.
ONE-TOUCH DIALING
2-9: Press and hold the corresponding memory number for more than 1
second.
TWO-TOUCH DIALING
10-99: Press the first digit and second digits of the memory number short
and long respectively.
Stores up to 500 entries, each of which can be assigned to a group.
Entries can be retrieved by name or group.
ADD NEW
Adds a new entry.
1.
Press Left Soft Key [Menu], then press “Contacts”,
then "Add new".
2. Fill in the fields as they are selected. Press the Navigation Key up
or down / to select a field.
3.
To save the entry, press Left Soft Key [Save]. To return to the
previous page, press .
• If no phone number is stored in the location entered, "Location is
empty" will appear on the screen.
• If One Touch Dial is set to Off:
Enter the speed dial location number then press the Send Key .
• Location 1 is reserved for voicemail.
Location 2-99 are unassigned.
To assign a speed dial location, please see page 43.
Note
PHONE BOOK FIELDS: Name/Mobile/Email/URL/Group/Ringtone/Vibration/
Msg Alert/Photo/Secret/Memo
See page 32 for more detailed information about storing a number. Note
071012_1450M-EN_REV01.indd 38-39 071012_1450M-EN_REV01.indd 38-39 2007.12.17 10:20:43 AM 2007.12.17 10:20:43 AM