UTStarcom CDM1450 - Manual (Page 30)

58 59
SETTINGS SETTINGS
Power On/Off
To adjust the Power on/off volume:
1.
Press Left Soft Key [Menu], then press “Settings”.
Press “Sound”, then press “Volume”.
2. Press “Others”, then press "Power on/off".
3. Highlight “Use ringer” or “Separate” and press to select.
If Separate is selected, press the Navigation Key down to
highlight the volume level. Press the Navigation Key left or right
/ to adjust the volume level.
4.
Press Left Soft Key [Save] to save the setting.
ALERTS
This feature allows you to set additional phone alerts.
Minute Minder
This alert notifies you every minute that you have been on a call.
1.
Press Left Soft Key [Menu], then press “Settings”.
Press “Sound”, then press “Alerts”.
2. Press “Minute minder”.
3. Highlight “On” or “Off” then press Left Soft Key [Select] to
save the setting.
Connect Tone
This alert notifies you that a call has been successfully placed.
1.
Press Left Soft Key [Menu], then press “Settings”.
Press “Sound”, then press “Alerts”.
2. Press “Connect tone”.
3. Highlight “On” or “Off” then press Left Soft Key [Select] to
save the setting.
Service Tone
1. Press Left Soft Key [Menu], then press “Settings”.
Press “Sound”, then press “Alerts”.
2. Press “Service tone”.
3.
Highlight “On” or “Off” then press Left Soft Key [Select] to
save the setting.
This setting controls the volume of the applications.
• Use ringtone vol.: Plays the application at the same volume as the voice
ringtone and allows the side volume keys to change the
application volume at the same time as the voice ringtone.
• Use separate vol.: Plays the application at the selected volume level. Alerts
will always play at this level unless the ringtone volume is
set to “Silence all” or “Vibrate”.
071012_1450M-EN_REV01.indd 58-59 071012_1450M-EN_REV01.indd 58-59 2007.12.17 10:20:53 AM 2007.12.17 10:20:53 AM