UTStarcom CDM1450 - Manual (Page 46)

90 91
TOOLS TOOLS
Press Right Soft Key for “AM” or “PM”. Press the Navigation
Key down to move to the next fields. In the Contents field,
enter any notes or message for the event, then press [Save]
to go back to the Scheduler screen. Press to move to the next
fields. In the Notice field, press the Navigation Key left or right
/ to select On Time, Before 10 min, Before 20min, Before 1 hour
or Before one day. Press the Navigation Key down to move to
the next fields. In the Snooze field, press the Navigation Key left
or right / to select 5Min, 10Min, 15Min, or 20Min. Press the
Navigation Key down to move to the next fields. In the Ring
Type field, highlight the ringtone you want and press Left Soft Key
[Select].
4. Press Left Soft Key [Save] to save the event.
5.
The date of the event will be marked on your calendar.
MEMO PAD
To access the memo pad:
1.
Press Left Soft Key [Menu], then press “Tools”.
Press “Memo pad”.
2.
To input a memo, select press Left Soft Key [Add].
3.
Press Left Soft Key [Save] to save the memo.
STOPWATCH
You can simultaneously time up to 10 different events.
1.
Press Left Soft Key [Menu], then press “Tools”.
Press “Stopwatch”.
2.
To measure a time period:
WORLD CLOCK
1.
Press Left Soft Key [Menu], then press “Tools”.
Press “World clock”.
2.
Press the Navigation Key left or right / to scroll through the
different cities.
AIRPLANE MODE
When set to On, the Airplane Mode disables all radio functions of
your device. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as the
camera and the Tools) safely in sensitive environments, such as on board
an aircraft.
1.
Press Left Soft Key [Menu], then press “Tools”.
Press “Airplane mode”.
2. Select “On” or “Off”, then press Left Soft Key [Select] to save
the setting.
• To start, press the Left Soft Key [Start].
• To stop the timing, press the Right Soft Key [Stop]. To continue timing, press
the Left Soft Key [Continue].
• Press the Left Soft Key [Lap] to save the time at one instance. You can show
up to 10 times.
• To reset it, press the Right Soft Key [Reset].
• DST: Specifies whether the current time of the selected place is adjusted to
Daylight Savings Time.
• Dual: To set dual time.
071012_1450M-EN_REV01.indd 90-91 071012_1450M-EN_REV01.indd 90-91 2007.12.17 10:21:14 AM 2007.12.17 10:21:14 AM