UTStarcom CDM1450 - Manual (Page 26)

50 51
Customizes your phone and optimizes performance through a variety of
settings.
SOUND SETTINGS
RINGER TYPE
To select a ringer type for:
Voice calls
1. Press Left Soft Key [Menu], then press “Settings”.
Press “Sound”, then press "Ringer type".
2.
Select “With Caller ID”, “No Caller ID” or "Roam ringer" then
press .
3. Select your desired ringers from the list by pressing the Navigation
Key up or down / . To hear a ringtone that is highlighted,
press Right Soft Key [Play].
4. To save the selected ringtone, press Left Soft Key [Select] to
save the setting.
RECENT CALLS
CALL TIMER
Checks the usage time and manages your calls within the limit you set.
The four timers include Last Call, Incoming Calls, Outgoing Calls and All
Calls.
1. Press Left Soft Key [Menu], then press for the “Recent
Calls” menu. Press “Call timer”.
2.
Press the Navigation Key up or down / to view the different
timers. Press Right Soft Key [Reset all] to Reset all call times.
3.
To return to the previous page, press .
SETTINGS
• With Caller ID: Set ringtone for any incoming call from a saved contact phone
number, unless the contact was saved with a specific ringtone.
• No Caller ID: Set ringtone for any incoming call from someone not saved to
your contact list.
• Roam ringer: Sounds a different ringer when you are in a roaming service
area. Select Normal or Distinctive.
071012_1450M-EN_REV01.indd 50-51 071012_1450M-EN_REV01.indd 50-51 2007.12.17 10:20:48 AM 2007.12.17 10:20:48 AM