UTStarcom CDM1450 - Manual (Page 29)

56 57
SETTINGS SETTINGS
Voicemail
To adjust the Voicemail alert volume:
1.
Press Left Soft Key [Menu], then press “Settings”.
Press “Sound”, then press “Volume”.
2. Press “Others”, then press "Voicemail".
3. Highlight “Use ringer” or “Separate” and press to select.
If Separate is selected, press the Navigation Key down to
highlight the volume level. Press the Navigation Key left or right
/ to adjust the volume level.
4.
Press Left Soft Key [Save] to save the setting.
Alarm & scheduler
To adjust the Alarm & scheduler volume:
1.
Press Left Soft Key [Menu], then press “Settings”.
Press “Sound”, then press “Volume”.
2. Press “Others”, then press "Alarm & scheduler".
3. Highlight “Use ringer” or “Separate” and press to select.
If Separate is selected, press the Navigation Key down to
highlight the volume level. Press the Navigation Key left or right
/ to adjust the volume level.
4.
Press Left Soft Key [Save] to save the setting.
This setting controls the volume of the applications.
• Use ringtone vol.: Plays the application at the same volume as the voice
ringtone and allows the side volume keys to change the
application volume at the same time as the voice ringtone.
• Use separate vol.: Plays the application at the selected volume level. Alerts
will always play at this level unless the ringtone volume is
set to “Silence all” or “Vibrate”.
This setting controls the volume of the applications.
• Use ringtone vol.: Plays the application at the same volume as the voice
ringtone and allows the side volume keys to change the
application volume at the same time as the voice ringtone.
• Use separate vol.: Plays the application at the selected volume level. Alerts
will always play at this level unless the ringtone volume is
set to “Silence all” or “Vibrate”.
071012_1450M-EN_REV01.indd 56-57 071012_1450M-EN_REV01.indd 56-57 2007.12.17 10:20:52 AM 2007.12.17 10:20:52 AM