UTStarcom CDM1450 - Manual (Page 7)

12 13
BATTERY USAGE
(BATTERY INSTALLATION) BATTERY USAGE
(BATTERY REMOVAL)
1.
Place the battery (label side up) on the back of the phone so the metal
contacts match up on the battery and in the battery cavity.
2.
Slide the battery down into the battery cavity until it locks into place.
1.
Push down the release latch button, then slide the battery cover off
the phone.
2.
Lift the battery up and out of the battery cavity from the top of the
battery.
If the battery is not correctly placed in the compartment, the handset will not
turn on and/or the battery may detach during use. Note
071012_1450M-EN_REV01.indd 12-13 071012_1450M-EN_REV01.indd 12-13 2007.12.17 10:20:34 AM 2007.12.17 10:20:34 AM