Villaware INSTRUCTION MANUAL FPVLJESLO1 - Manual (Page 6)

5
Figure 6
instructions for use
BEFORE USING YOUR JUICE EXTRACTOR
Follow the assembling instructions listed below before using your
VillaWare ™ Juice Extractor:
• Before assembling your
juice extractor, make
sure it is unplugged and
placed on a dry, level
surface. Place filter basket
on top of the motor
base. (Figure 1 )
• Place the 1 -litre cup
under the spout located
on the front of the juicer.
Other jars or glasses can
also be used. (Figure 6)
Figure 3
• Place the pulp container
into position by tilting it
slightly. (Figure 3)
• Place the stainless steel
filter on top of the
filter basket, turning it
until it settles into the
grooves of the motor
shaft (Figure 2). Carefully
handle the stainless steel
filter using the edges.
Do not touch the sharp
blades at the base of the
filter.
• Once the cover is in place,
slide clamp toward the
unit to lock it. (Figure 5)
Figure 5
Figure 1 Figure 2
• Open the clamp all the
way to the right of the
unit. Place juicer cover on
top of the filter basket
until it fits into place.
(Figure 4)
Figure 4