Vision Fitness Simple and Deluxe - Manual (Page 49)

45
GENERAL
USER ENGINEERING MODE
(SIMPLE Only, Continued)
DEFAULT TIME
P15 represents the program default time. You can modify this time by using
the SPEED or ELEVATION arrows. Press and hold SELECT to save the new
value.
AUTO-CALIBRATION
(SIMPLE Only)
DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO CALIBRATION
AUTO appears in the data window for the auto-calibration function. To
begin auto-calibration, press START. The Treadmill will run through
minimum and maximum speed and elevation. The auto-calibration will
take 3-5 minutes. When auto-calibration is complete “End” will appear in
the data window. The Treadmill will reboot and return to the startup
screen.
EXIT USER ENGINEERING MODE
P17 represents exit mode. When you press SELECT to select the function,
the console performs a reboot, returning to the startup screen.