VXI VT1433B - Manual (Page 166)

To remove the input assemblies
1
Remove top cover, see “To remove the top cover.” Remove the front panel, see steps 1 and 2 in “To
remove the front panel.” Note that the following steps are showing illustrations of an VT1433B with a
standard configuration (two input assemblies). If the VT1433B has option 1DL (one input assembly) , the
following steps will be the same except the length of the screws and the number of input assemblies to be
removed.
2
Using a T-10 Torx driver, remove the four screws that attach the assemblies to the bottom cover.
VT1433B User's Guide
Replacing Assemblies
10-18