VXI VT1433B - Manual (Page 29)

The program scope.vee starts, showing four channels, with time record and FFT
for each channel.
To start a measurement, click the Run button on the toolbar (triangle symbol).
To pause, click on the Pause button (two vertical bars, next to the Run button).
To stop the measurement, click the Stop button (square symbol).
This screen is VEE’s panel view, where interaction with the system can be
performed much as one would with the front panel of a standalone instrument.
The VEE detail view screen allows for configuration of the system and a view
panel which can be used to make measurements.
To look at the scope.vee program “behind the scenes,” click on the View Detail
button on the toolbar (chart symbol). To return to the original (panel) view, click
on the View Panel button (sine wave symbol).
Click on the View Detail button again to look at the detail view screen.
VT1433B User's Guide
Getting Started With the VT1433B
2-11
Figure 2-3: scope.vee - Panel View