Verizon DMS 100 - Manual (Page 14)

25
Call Restriction Options
This feature enables you to select and control the incoming and
outgoing calling capabilities of each of your CustoPAK lines. Each line
can only be equipped with one Call Restriction option, which has been
programmed by Verizon.
NOTE: Verizon must automatically activate this feature. You cannot
activate or deactivate the feature as you choose. If you want to
add or update Call Restriction options, please contact your Verizon
representative.
24
Call Pick-Up – Group
Call Pick-Up – Group enables you to answer (pick-up) calls directed to
any other line within your Call Pick-Up group by dialing a code. If more
than one person tries to pick-up the call, the first user will receive the
call, and the others will receive a busy signal as confirmation that the
call was answered. Use Call Pick-Up – Group to provide maximum call
coverage and ensure against missed calls.
To use Call Pick-Up – Group:
Ī
Lift the handset and listen for dial tone.
Ī
Press (the incoming call is connected to your station).
To use Call Pick-Up – Group when you are already on the phone:
Ī
Tell the person to whom you are speaking that you are going to put
them on hold.
Ī
Press the switchhook (or the Tap/Flash/Recall/Link button,
depending on your telephone set).
Ī
Listen for dial tone.
Ī
Press to put the first call on hold.
Ī
Press (the incoming call is connected to your station).
NOTES:
1.) You cannot use Call Pick-Up – Group to connect to an Automatic
Callback call.
2.) If more than one line in your Call Pick-Up group is ringing, you
cannot select which line to answer. The system will automatically
direct the pick-up to the call that came in first.
3.) All lines in a Multi-Line Hunt group must be in the same Call
Pick-Up group.