Verizon DMS 100 - Manual (Page 23)

43
NOTES:
1.) The Priority Call special ring will not follow a Call Forwarding or
Select Call Forwarding call.
2.) This feature must be applied to all members of a Hunt group.
3.) The Priority Call special ring will not hunt.
4.) This feature will not work on a Hunt group’s pilot number.
Select Call Forwarding
Select Call Forwarding lets you program up to 12 numbers — from
within your regional calling area— that you wish to have call
forwarded. When a number on your Select Call Forwarding list calls
you, it will be forwarded to the number you have programmed to
receive the call. Calls from all other numbers will be handled in the
normal manner. You can program calls to forward to virtually any
number— local or long distance — and Select Call Forwarding allows
you to change your forward-to number whenever necessary. Use
Select Call Forwarding to remain accessible and give top priority to
your most important callers. This feature may generate local, regional
toll or long distance charges. This feature is not available in the
DMS 10 switch type.
To turn Select Call Forwarding on or off:
Ī
Lift the handset and listen for dial tone.
Ī
Press .
Ī
Listen to the voice recording for instructions on how to turn your
Select Call Forwarding service on and off and how to change or
review your Select Call Forwarding list.
To update your Select Call Forwarding list:
Ī
Press and follow the voice-recorded instructions.
If your list is full, you must delete one number before you can
add another.
42
Last Number Redial
This convenient service enables you to be connected to the last
number you dialed. Use Last Number Redial to save time and
improve efficiency by reducing dialing time and time spent looking
for telephone numbers. This feature is not available for 5ESS
and DMS 10 switch types.
To be connected to the last number you dialed:
Ī
Lift the handset and listen for dial tone.
Ī
Press and wait for the call to connect.
NOTE: If you called both numbers when establishing a three-way
conference, the second number is the one stored for a Last Number
Redial request.
Priority Call
Priority Call enables you to program up to 12 numbers—from within
your regional calling area—to be identified with a special ring pattern
(short-long-short). Use Priority Call to help you know when an
important call comes in so you can give superior service to your
high-priority callers. This feature is not available in the DMS 10
switch type.
To turn Priority Call on or off:
Ī
Lift the handset and listen for dial tone.
Ī
Press .
Ī
Listen to the voice recording for instructions on how to turn
Priority Call on or off, and how to change or review your
Priority Call list.
To update your Priority Call list:
Ī
Press and follow the voice-recorded instructions.
If your list is full, you must erase one number before you can
add another.