Verizon DMS 100 - Manual (Page 17)

31
CustoPAK Optional Features
The following features are available for each of your CustoPAK lines
at an additional monthly charge per line. As you read through this
section, be aware of your switch type (found on the front cover of
this guide), since some of these Optional features are not available
for certain switch types. To add or change any of these features after
your initial installation, contact your Verizon representative.
30
To establish/add or change a number on your
Speed Dialing list:
Ī
Lift the handset and listen for dial tone.
Ī
Press and listen for confirmation tone.
Ī
Press (GTD-5 only, skip this step in all other switches).
Ī
Press the Speed Dialing code numbers to be programmed (2-9 for all
switches except 5ESS, press 2-7 for 5ESS).
Ī
Dial the telephone number to be assigned to the code, along with
any required access codes, ( i.e., long distance carrier access
code) up to 28 digits.
Ī
Listen for confirmation tone.
Ī
Hang up.
Ī
Repeat steps for each code number to be programmed.
To place a Speed Call from the short list:
Ī
Lift the handset and listen for dial tone.
Ī
Press (all switches) and then dial the Speed Dialing code
number (2-9 or 2-7 depending on what switch type you have).
See page 50 for Speed Dialing code charts.
Ī
Wait for party to answer.
NOTES:
1.) OPTIONAL: After you press and the code number, press
again for a quicker connection.
2.) Service codes such as 911, cannot be programmed.
3.) Fully restricted lines cannot have Speed Dialing.
4.) Customers may experience a 2- to 3-second timing delay
when activating Speed Dialing codes that match other feature
activation codes.