VARTA V-DV800BT User Manual

Page 18

Advertising
background image

V-DV800BT

18

iX-bass
Press and hold PTY/X-BASS button to turn on the X-Bass function, and "ix-Bass ON" will appear on the display for 3
seconds. Press and hold X-Bass button again to turn this function off.
Please refer to the related description in "Audio Menu of X-Bass" for details operation of X-Bass control. The X-Bass
Boost Level control will only appear in the Audio Menu only if the X-Bass function is currently activated.

Mode
Press MODE button to select a different mode of operation as indicated on the display panel. The modes are: TUNER,
CDP, AV-in 1, AV-in 2.

A/V input
Connect the external device to A/V in jack located on the front panel, then
press MODE button to select AUX mode. Press MODE button again to exit
A/V Mode and select other mode.
Note: The unit is only support the 3.5mm A/V Jack Pin Assignment shown as
diagram.

Volume
To increase the volume, rotate VOLUME knob clockwise or press VOLUME+/VOLUME- buttons on the RC. To
decrease the volume, rotate the knob counterclockwise. When volume is adjusted, the volume level will be shown on the
display panel as a number ranging from 0 (lowest) to 46 (highest).

Display
Press the DISP/MENU button repeatedly to select the following different Display options: Spectrum mode 1 > Spectrum
mode 2 > Spectrum mode 3 > Default Display. The selected display will appear in the display when the unit is turned on.

Default Display True Spectrum Analyzer mode 1 True Spectrum Analyzer mode 2 True Spectrum Analyzer mode 3

Advertising