VARTA V-DV800BT - Manual (Page 20)

V-DV800BT
20
System menu operation
You can adjust the system setting in this unit by entering into the system menu, please read the below details operation for
each system menu items:
Access into System Menu Function List
Press and hold DISP/MENU button for more than 3 seconds to enter the system menu items. Navigate through the menu
items by repeatedly pressing DISP/MENU button to move to the next or previous option. Once the needed option appears
on the display, Rotate the VOLUME knob or press VOL+/VOL- buttons to adjust the setting. Press DISP/MENU or OK
to confirm and go to the next entry.
System Function Menu
Contrast
The contrast level of the display is set at “CONTRAST 05” by default. Adjust the contrast level from 00 to 10.
Clock Format
This option allows the selection of 12 hour or 24 hour time display format. “12 Hour” is the default setting.
Time Set
The time of the clock will be set to 12:00 as the default. Press VOLUME+ button or rotate VOLUME knob clockwise to
adjust minutes; press VOLUME - button or rotate VOLUME knob anticlockwise to adjust hours.
Local or Distance Select
This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning.
“Distance” is the default, allowing the radio to stop at a broader range of signals. To set the unit to select only strong local
stations during automatic tuning, rotate the VOLUME knob or press VOL+/VOL- buttons to select “Local” mode.
Region
REGIONAL “OFF” will be displayed by default. If “On” is selected, then during an AF search or PI seek, it will
implement to station, which have all the PI codes, which are the same as the current station. If “Off” is selected, then