VARTA V-DV800BT - Manual (Page 42)

V-DV800BT
42
System setup menu
Press the SETUP on the RC or press and hold AS/PS button on the front panel to enter the setup menu. Press it again to
leave setup menu.
Use UP/DOWN buttons to select the category.
Press RIGHT button to enter submenu.
Use UP/DOWN buttons to select the setting you need to change.
Press OK button to confirm changes.
Press LEFT button until you reach the main menu window.
Language
Choose OSD menu language and MPEG4 Subtitle language.
Note: Some DVDs may not include the pre-selected language. In this case, the
unit will automatically display menus in the disc’s initial language setting.
Video
Aspect Ratio
Selecting the TV Aspect setting allows the user to select the aspect ratio of the TV
(DVD and VCD only). The following options are available:
4:3 = Aspect ratio of TV is 4:3.
16:9 = Aspect ratio of TV is 16:9.
Notes:
Most widescreen DVDs will not allow pan and scan conversion. If 4:3 PS is
selected on these DVDs, letterboxing will be used instead.