VARTA V-DV800BT - Manual (Page 6)

V-DV800BT
6
Din rear-mount (method 2)
Installation using the screw holes at both sides of the unit.
1.
Select a position where the screw holes of the main unit are fitted for aligned, and tighten the screws at 2 positions
at each side.
Use either truss screws (5 x 5 mm), depending on the shape of the screw holes in the bracket.
2. Screw.
3.
Factory radio mounting bracket.
4. Dashboard or Console.
5.
Hook (Remove this parts).
Note: The mounting box, outer trim ring and the half-sleeve are not used for this method of
installation.