VARTA V-DV800BT - Manual (Page 46)

V-DV800BT
46
Samsung (Redial last call), (In-Band Ring Tone): D508, D528.
LG: KG320.
Pairing
Pairing The Bluetooth System Between User's Mobile Phone & The Unit
Enter MENU - PAIRING mode to activate the operation of Pairing. To do that, press and hold MENU button. And
press MENU button repeatedly until PARING:1
is found.
Once PAIRING:1 appears on the display, press ENTER button on the unit or OK button on the RC to activate the
Pairing mode.
Note: To terminate the pairing, you can press the BAND/CLEAR button at any time.
Select the Bluetooth set up on the Mobile Phone and prepare your Mobile phone to pairing.
Note: Please refer to the instruction manual of your mobile phone on how to enter and exit the Bluetooth set up, and
Bluetooth pairing.
“Bt60” should appear in the pairing list on the mobile phone. Select “BT60” and then input the password “1234”.
If the pairing is successful, the display will show PAIRING:1 and Mobile Phone name.
If the pairing failed, PAIRING:1 X will be flashing on the display for 3 seconds. And the unit will switch back to the
previous mode automatically.
Note: During the Pairing, only POWER, BAND/CLEAR, VOLUME +/- & MUTE are functional, other function buttons
are disabled and non-operational during the pairing mode.
Re-Connection Of The Bluetooth System
The unit has built-in Auto-Reconnection function.
For example:
If The Mobile Phone is out of range (2 meters away from the Head unit). Under the condition of lost connection
when you come back to the unit. At the same time, there is an incoming call or you are under conversation on the
Mobile Phone 2 meters away from the Head Unit and come back to Head unit.
Every time turn the ignition key is turned from off to on the unit will Auto re-connect with the mobile phone.
In some conditions, you need to reconnect manually.