VARTA V-DV800BT - Manual (Page 21)

V-DV800BT
21
during AF search or PI seek the regional code in the format PI code will be ignored. A regional station is possible to be
received.
Note: The Regional function On/Off Setting is valid only when the “AF” function is on.
Program Volume (VOL PGM)
This option allows the setting of the volume level of this unit automatically to be assumed when first turned on. Volume
level “12” is the default setting. To program a specific volume level after turning on, rotate the VOLUME knob or press
VOL+/VOL- buttons to select the desired volume level.
Beep Tone
The beep tone feature allows the selection of an audible beep tone to be heard each time any button is being pressed on
the panel of this unit. Default setting is ON. Rotate the VOLUME knob or press VOL+/VOL- buttons to select the “Off”
option.
Illumination color (COLOR)
This option allows selection between two colors for the backlight illumination of the unit. “COLOR 1” is the default color
and will illuminate the unit with green backlight. You can select “COLOR 2”, which will illuminate the unit with red
backlight.
Audio Menu
Press AUDIO button to access the Audio Menu. Navigate through the audio menu items by pressing AUDIO button
repeatedly. Once the needed menu item appears on the display, rotate VOLUME knob or press VOLUME +/ VOLUME -
buttons to adjust the needed setting value within 5 seconds.
Note: The unit will automatically exit the audio menu after 10 seconds of time out.
The following audio menu items can be adjusted as described above.
Volume
Use VOLUME knob to adjust the volume level, the level will be shown on the display ranging from 00 (lowest) to 46
(highest).
iX-Bass level
Adjust the iX-BASS level from Low, Middle (MID) or High.
Subwoofer