VARTA V-DV800BT - Manual (Page 23)

V-DV800BT
23
Dual zone operation
This unit is equipped with the advance feature “Dual Zone”. This function is useful if the user wants to select different
modes of the audio output source for front and rear speakers. The details operation as follows:
On/Off operation
“Off” is the default setting. Press the 2-ZONE ON/OFF button on the RC or TA button on the panel to switch between
Dual Zone On or Off. The “2-Zone” icon will appear on the display after Dual Zone is selected “on”.
Select front/rear zone sources
Once “ON” is selected, press AUDIO button repeatedly to change between the F-Zone (Front) and the R-Zone (Rear)
sources.
If “F-Zone” is selected, you have 10 seconds to navigate through different modes by using VOLUME knob. Tuner >
DVD >AV-In are available for selection for front speakers audio output.
If “R-Zone” is selected, you have 10 seconds to navigate through different modes by using VOLUME knob. Tuner >
DVD > AV-In are available for selection for rear speakers audio output.
If no selection is being made within 5 seconds, the unit will resume to the pervious mode.
Operating the function of front/rear zone sources
When Dual Zone is turned “ON”, MODE button is used to change between the Front Source and Rear Source. Press
MODE button repeatedly to change between Front and Rear modes.
The display will show the Rear Source mode for 10 seconds. You have 10 seconds to make the operation on the Rear
Source function.
The display will automatically switch back to the Front Source after 10 seconds. And the controls of the front panel
and RC are now resumed to operate for Front Source function again.