VARTA V-DV800BT - Manual (Page 25)

V-DV800BT
25
Tuner operation
Band selection
Press BAND/CLEAR button on the unit or 0/BAND button on the RC to switch between FM bands and AM (MW)
bands.
Station search
Manual tuning: press NEXT or PREVIOUS buttons on the panel for more than 3 seconds and press them repeatedly
or FAST FORWARD/TUNE UP or FAST REWIND/TUNE DN button on the RC and press them repeatedly to move
the radio frequency one step up or down.
Auto seek tuning: press NEXT or PREVIOUS buttons on the panel or NEXT/SEEK UP or PREVIOUS/SEEK DN
button on the RC to search for the next station automatically.
Auto store
Automatically selects 6 strong stations and store them in the current band. Select a band (if needed). Press and hold
AS/PS button. The new stations replace stations already stored in that band.
Note: AF function should be OFF.
Preset Scan
Scan stations stored in the current band. Select a band (if needed). Press AS/PS button for less than 3 seconds. The unit
will pause for ten seconds at each preset station. Press AS/PS button again to stop scanning when the desired station is
reached.
Stereo
The unit will automatically pick up a stereo signal, when available. When in stereo mode, the ST icon appears in the
display. When no stereo signal is available, the unit will automatically change to mono operation, and no icon will be
displayed.