VARTA V-DV800BT - Manual (Page 48)

V-DV800BT
48
Incoming call
Answering an incoming call
When there is an incoming call, the display will show the Phone Number. If the incoming call has no caller ID, the
display will show “PHONE IN”. You can press ENTER button or “MODE” button to answer/accept the call.
Note: The audio output of the present mode will be muted and the ringing tones will be heard, if an incoming call is not
being answered.
You can use the VOLUME knob or VOLUME +/- buttons to adjust the volume level.
To end the conversation, press the BAND/CLEAR button. The unit will switch back to the previous mode
automatically and release the mute of the previous mode at the same time.
During an incoming call under stand by mode (Ignition on and Power Off). The system will automatically switch on
the head unit.
Note: While there is an Incoming call or under talking mode, the EJECT button is disabled.
Rejecting an incoming call
You can press BAND/CLEAR button to reject the incoming call.
Outgoing call
Use the mobile phone, which paired with this unit to make an outgoing call.
During the talking mode, the display will display “PHONE 00:00(time of talking)”
You can use the VOLUME knob or VOLUME+/VOLUME- buttons to adjust the volume level.
To end the conversation, press BAND/CLEAR button. The unit will switch back to the previous mode automatically.
The mute of the previous mode will be released at the same time.
During the talking mode, if the Ignition is being turned off, the unit will keep the conversation. After finishing the
conversation, you can press BAND/CLEAR button to switch off the unit.
Call transfer
Audio transfer from head unit back to the mobile phone
During the talking mode, press and hold MODE/TRANSFER button to transfer the audio from the unit back to the
mobile phone for privacy reason. The display will show TRANSFER