VTech LS6426-3 - Manual (Page 16)

12 12
Ringer volume (telephone base)
Press /VOL or /VOL on the right side of the telephone base to adjust the
ringer volume when the telephone is not in use. When you set the base ringer
volume to off, the message window displays 0 and the system announces, “Base
ringer is off.” When the telephone is ringing, press /VOL to temporarily turn
the base ringer off.
Ringer volume (handset)
You can set the ringer volume or turn the ringer off. When the
ringer is off,
Ringer off and appear on the screen.
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Ringers, then press
MENU
/SELECT.
Press
MENU
/SELECT to select >Ringer volume.
Press or to sample each volume level.
Press
MENU
/SELECT to save your selection and return to
the previous menu. You hear a confirmation tone.
The ringer volume also determines the ringer volume of intercom calls and paging
tone. However, paging volume ranges from levels 4 to 6 only.
If the ringer volume is set to off, the handset displays
Caller ID won’t be
announced when you save the setting. The caller ID will not be announced
when you have an incoming call (page 14).
•
•
Ringer tone
You can choose from different ringer tones for each handset.
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Ringers, then press
MENU
/SELECT.
Press or to highlight >Ringer tone, then press
MENU
/SELECT.
Press or to sample each ringer tone.
Press
MENU
/SELECT to save your selection and return to the
previous menu. You hear a confirmation tone.
If you turn off the ringer volume, you will not hear ringer tone samples.
•
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Intercom
>Ringers
>Ringer volume
Ringer tone
RINGER VOLUME
Intercom
>Ringers
>Ringer volume
Ringer tone
RINGER VOLUME
Ringer volume
>Ringer tone
RINGER TONE
>Tone 1
Ringer volume
>Ringer tone
RINGER TONE
>Tone 1
Telephone settings