VTech LS6426-3 - Manual (Page 21)

17
Telephone settings
17
CID time synchronization
This feature allows the time and date to be set by incoming caller ID information.
The default setting is On.
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Settings, then press
MENU
/SELECT.
Press or to highlight >CID time sync, then press
MENU
/SELECT.
Press or to choose >On or >Off.
Press
MENU
/SELECT to save your selection and return to
the previous menu. You hear a confirmation tone.
Home area code
If you dial your local calls using only seven digits (area code not required), you
can program your home area code so that when you receive a call within your
local area, the telephone number is automatically stored without the area code in
the caller ID log.
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Settings, then press
MENU
/SELECT.
Press or to highlight >Home area code, then press
MENU
/SELECT. The screen displays
Only for 7digit dial from CID, then advances to home area
code edit mode.
Use the dialing keys to enter a three-digit home area code.
Press
MUTE
/DELETE to delete a digit.
Press and hold
MUTE
/DELETE to delete all digits.
Press or to move the cursor to the left or right.
Press
MENU
/SELECT to save. You hear a confirmation tone.
The screen displays Area code will not show in CID, then
automatically turns to the previous menu.
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the
home area code you have already programmed, following the steps above. After
you have deleted the home area code, _ _ _ will appear on the display.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
•
5.
Key tone
>CID time sync
CID TIME SYNC
>On
Key tone
>CID time sync
CID TIME SYNC
>On
CID time sync
>Home area code
Only for 7digit
dial from CID
HOME AREA CODE
___
CID time sync
>Home area code
Only for 7digit
dial from CID
HOME AREA CODE
___