VTech LS6426-3 - Manual (Page 50)

46
Answering system settings
Number of rings
You can choose from two, three, four, five, six rings or toll saver. With toll saver
selected, the answering system answers after two rings when you have new
messages, and after four rings when you have no new messages. This enables
you to check for new messages and avoid paying unnecessary long distance
charges if you are calling from out of your local area.
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Answering sys, then press
MENU
/SELECT.
Press or to highlight >Ans sys setup, then press
MENU
/SELECT.
Press or to highlight ># of rings, then press
MENU
/SELECT.
Press or to choose 6, 5, 4, 3, 2 or Toll saver, then
press
MENU
/SELECT to save.
Remote access code
A two-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can set the code from
00 to 99.
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Answering sys, then press
MENU
/SELECT.
Press or to highlight >Ans sys setup, then press
MENU
/SELECT.
Press or to highlight >Remote code, then press
MENU
/SELECT.
Use the dialing keys ( 0-9) to enter a two-digit number, then
press
MENU
/SELECT to save.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Call screening
># of rings
# Of RINGS
>3
Call screening
># of rings
# Of RINGS
>3
# of rings
>Remote code
REMOTE CODE
19
# of rings
>Remote code
REMOTE CODE
19