VTech LS6426-3 - Manual (Page 24)

Telephone operation
20
Mute
The mute function allows you to hear the other party but the other party cannot
hear you.
During a call, press MUTE/
DELETE
. The handset displays
Muted for a few seconds and MUTE displays until the mute
function is turned off.
Press
MUTE/
DELETE
again to resume the conversation. The
handset screen temporarily displays Microphone ON.
Temporary ringer silencing
When the telephone is ringing, press OFF/
CANCEL
or MUTE/
DELETE
to temporarily
silence the ringer on that handset only. The handset displays Ringer muted and
. This turns off the ringer without disconnecting the call. The next call rings
normally at the preset volume.
Each handset rings when there is an incoming call unless the ringer volume is
turned off on that handset.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call. This is useful if you need to send touch-tone signals to
access your telephone banking or long distance services.
During a call, press on the handset.
Use the dialing keys to enter the number you wish to dial. The telephone
sends touch-tone signals. The telephone automatically returns to pulse dialing
mode after you end the call.
•
•
1.
2.