VTech LS6426-3 - Manual (Page 33)

29
Multiple handset use
PTT to multiple handsets
When you have two to five registered handsets, PTT supports one-to-all calls
(one-to-four maximum). However, when you have six or more registered
handsets, PTT supports a maximum of one-to-three calls. The first four
registered handsets will be able to use this feature. Other handsets can only use
PTT for one-to-one calls.
To begin a PTT call to multiple handsets:
Press and hold PUSH TO TALK when the handset is not in use.
If you have more than two handsets, press PUSH TO TALK when the
handset is not in use. Press and #, or or to highlight >All handsets
then press
MENU
/SELECT or PUSH TO TALK.
Your handset displays Connecting to all handsets... for a few seconds. When
the connection is made, all handsets display Press and hold [PTT] to talk and
beep once.
Press and hold
PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to all
destination handsets.
While you are speaking, your handset displays PTT To handset: X (X
represents the destination handset).
Release
PUSH TO TALK after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TALK to speak
again or the destination handsets can respond (see Answer a PTT call on
page 30).
Press
OFF/
CANCEL
to end the PTT call
.
The handset displays Push to talk Ended
for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
After PUSH TO TALK is released, the PTT call session remains open for a short
time. If no one presses PUSH TO TALK within 10 seconds, the PTT call session
ends automatically.
1.
•
•
2.
3.
4.