VTech LS6426-3 - Manual (Page 51)

47
Answering system settings
Message alert tone
The telephone base beeps every 10 seconds to alert you of new messages. The
tone stops when all new messages have been reviewed.
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Answering sys, then press
MENU
/SELECT.
Press or to highlight >Ans sys setup, then press
MENU
/SELECT.
Press or to highlight >Msg alert tone, then press
MENU
/SELECT.
Press or to choose >On or >Off, then press
MENU
/SELECT to save.
The answering system must be turned on for the message alert tone to function.
Press any key on the telephone base (except
/FIND HANDSET) to temporarily
silence the message alert tone.
•
•
Message recording time
You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Answering sys, then press
MENU
/SELECT.
Press or to highlight >Ans sys setup, then press
MENU
/SELECT.
Press or to highlight >Recording time, then press
MENU
/SELECT.
Press or to choose >3 minutes, >2 minutes, or
>1 minute, then press
MENU
/SELECT to save.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Remote code
>Msg alert tone
MSG ALERT TONE
>On
Remote code
>Msg alert tone
MSG ALERT TONE
>On
Msg alert tone
>Recording time
RECORDING TIME
>3 minutes
Msg alert tone
>Recording time
RECORDING TIME
>3 minutes