VTech LS6426-3 - Manual (Page 25)

Telephone operation
21
Find handset
The find handset feature helps you find misplaced handsets.
To start the paging tone:
Press /FIND HANDSET on the telephone base. All
idle handsets ring, the handset screens display
** Paging **.
To end the paging tone:
To end the paging tone, press /
FLASH
, /SPEAKER,
any dialing key ( 0-9, #, ) on the handset or press
/FIND HANDSET on the telephone base.
Press OFF/
CANCEL
or MUTE/
DELETE
to temporarily turn off the paging tone on
the handset. Its screen shows Ringer muted and .
All registered handsets ring when being paged even if the ringer volume is set
to off.
•
•
Call waiting
If you subscribe to call waiting service from your telephone service provider, you
hear an alert tone when there is an incoming call while you are on another call.
Press /FLASH to put your current call on hold and take the new call.
Press /FLASH at any time to switch back and forth between calls.
Equalizer
The equalizer feature on the handset enables you to change the
audio quality of the handset to best suit your hearing.
While on a call or intercom call, or listening to a message or
announcement, press EQ to select the equalizer setting Treble 1,
Treble 2, Bass or Natural (the default setting) for the handset.
The current setting is displayed on the handset briefly.
Redial
Each system handset stores the last 10 dialed numbers. Entries are shown in
reverse chronological order. When there are already 10 entries, the oldest entry
is deleted to make room for the new entry. When you access the redial list with
no records, the handset plays two beeps and shows Redial empty.
•
•
•
•