Visioneer PATRIOT 430 - Manual (Page 10)

S TEP 1: A SSEMBLE THE S CANNER
5
S
TEP
1: A
SSEMBLE THE
S
CANNER
1. Remove the scanner from its protective foam and plastic bag.
2. Check inside the document feeder mechanism and carefully remove
any foam particles that may have gotten inside it. Leave the cover open
so you can attach the Input tray.
3. Align the tabs on the Input tray with the slots inside the scanner and
slide the tray down into place.
4. Push the paper guide back until it snaps into place. Close the scanner
cover. Flip the paper guide extension up so it is fully extended.
5. Insert the pins on each side of the output tray into the holes on the
scanner. Flip open the extension on the output tray so it is fully
extended.