Visioneer PATRIOT 430 - Manual (Page 41)

36 V ISIONEER P ATRIOT 430 S CANNER U SER ’ S G UIDE
C
ONFIGURE
B
EFORE
S
CAN
Choosing Configure Before Scan simply opens either the TWAIN or WIA
scanning interface when you press or click a button. You can then use the
interface to change the Picture Type, Resolution, and other settings. When
you scan, the scanned image will still be sent as the file type and to the same
Destination Application already selected in the OneTouch Properties
window for that button.
T
O SET
C
ONFIGURE
B
EFORE
S
CAN
1. Open the OneTouch Properties window.
2. Using the button selection arrows, choose the button that you want to
set to configure before scanning.
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface to use
for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes prior
to scanning. Please see “Scanning from the TWAIN Interface” on
page 68 for detailed instructions about scanning with the TWAIN
Interface.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on
Configure Before Scan
to get the menu, and
choose the
interface to use for
scanning.