Visioneer PATRIOT 430 - Manual (Page 16)

S TEP 3: C ONNECT THE P OWER S UPPLY
11
S
TEP
3: C
ONNECT THE
P
OWER
S
UPPLY
Connect the power supply and power cord, and plug the power supply into
an electrical outlet.
To connect your Visioneer Patriot 430 scanner:
1.
Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply and into a wall outlet.
Note: Only use the power supply included with your scanner.
Connecting any other type of power supply may damage your scanner,
and will void its warranty.