Visioneer PATRIOT 430 - Manual (Page 88)

T ROUBLESHOOTING
83
Patriot 430 Scanner Parts List” on page 88 for the ordering number. See
“Replace the ADF Pad Assembly” on page 77 for the steps to replace the
pad.
Problem: If the USB cable is disconnected during a scan, the scanner
does not reconnect when the USB cable is plugged back in.
Unplug the power cable from the scanner, and then plug it back in.
If the scanner does not reconnect:
1. Unplug the power cable from the scanner.
2. Restart your computer.
3. After the restart is complete, plug the power cable back in.
S
TATUS
L
IGHT
T
ROUBLESHOOTING
C
ODES
A green status light indicates the normal state of the scanner.
Normal Operation
■ Blinking green: indicates the scanner is waking up from power saving
and preparing to scan.
■ Steady green: indicates the scanner is ready to scan.
Error Codes
If your scanner experiences hardware problems, the status light will blink
red, and the LED flashes an “E” and the error code number.
The LED blinks back and forth
between “E” and the error code
number (such as 8).
The red light flashes the number
of times as the error code (8 in
this example).