Visioneer PATRIOT 430 - Manual (Page 31)

26 V ISIONEER P ATRIOT 430 S CANNER U SER ’ S G UIDE
S
ELECTING
N
EW
S
ETTINGS FOR A
B
UTTON
1. Click the button selection arrows to select the button you want to
change.
As you click the arrows to cycle through the buttons, the available
settings on the window change to show them for each button.
2. Select the application where you want documents sent in the Select
Destination list.
To configure the list of available applications, click the Options tab.
See “Selecting Options for a Button” on page 50 for more information.
3. From the Select Configuration list, select a scan configuration.
These icons next to each scan configuration indicate the scanning
mode.
Use Configure Before Scan to set the scanning mode manually before
scanning. See “Configure Before Scan” on page 36.
Select a software
application as the
destination to send
scanned documents.
Select a configuration
for scanning the item.
Select a format for the
scanned image.
Click these arrows to
see the properties for
the button whose
settings you want to
change.
Color Grayscale Black and White Configure Before Scan