Visioneer PATRIOT 430 - Manual (Page 9)

4 V ISIONEER P ATRIOT 430 S CANNER U SER ’ S G UIDE
Installation
Installation is a quick, four-step process:
1. Assemble the scanner
2. Install the software
3. Connect the power supply
4. Connect the USB cable and turn on the power
B
EFORE
Y
OU
B
EGIN
Please make sure of the following before you begin installation:
■ The information in this guide may cover software not provided with
the scanner you purchased. Disregard any information about the
software not applicable to your scanner. Please visit our web site at
www.visioneer.com for the latest software updates for your Visioneer
Patriot 430 scanner.
■ If your computer has AntiVirus or AntiSpyware software running, you
may see messages during installation asking you to allow the
installation to proceed. The messages will differ based on the software
your computer is running, but in each case allow the installation to
proceed. Alternatively, you can turn off the AntiVirus or AntiSpyware
software before installing your scanner. But if you do, make sure to
turn it back on again when installation is finished.
■ If you already have a scanner connected to your computer, you need to
remove its driver programs first before beginning the installation of
your Visioneer Patriot 430 scanner. Please see the User’s Guide that
you received with your other scanner for specific instructions.
■ If your computer is running Windows Vista, you may see the Vista
User Account Control screen asking you to confirm system changes.
Click the Continue button to allow the installation to proceed.