Visioneer PATRIOT 430 - Manual (Page 63)

58 V ISIONEER P ATRIOT 430 S CANNER U SER ’ S G UIDE
S
CANNING WITH
E
VENT
F
ORWARDING
If you want to specify an application to use for scanning at the start of the
process, you can use event forwarding.
1. Open the OneTouch Properties window.
2. Select Still Image Client as the Destination Application.
You cannot choose a page format for this option as the Destination
Application is not selected until after starting the scanning batch.
3. Click OK.
4. Start scanning using the button you selected for event forwarding.
A dialog box opens for you to select the application to use for
scanning. Select the application in the box and click OK.
5. Now the application you selected opens and you can continue
scanning using the application’s TWAIN interface.