Visioneer PATRIOT 430 - Manual (Page 26)

S CANNING FROM O NE T OUCH
21
S
CANNING FROM
O
NE
T
OUCH
OneTouch is your main scanning interface for using the scanner. The
OneTouch LED on the scanner shows which scan setting will be used for
scanning. It is scan setting 6 in the example below.
The OneTouch Button Panel that you see on the computer screen shows
the pre-set function for each button (such as eMail) and the icons of the
applications (called the Destination Applications) where the images will be
sent when scanning is finished. In the example below, Button 6 will scan
the pages with Optical Character Recognition (OCR) processing and open
them in the Microsoft Word application.
You can reconfigure the buttons to have new scan settings, for instance, to
send the scanned images to a different Destination Application. See the
section, “Configuring the OneTouch Buttons” on page 25.
Note that if you reconfigure a button, the scanner LED will then refer to
that new scan setting.
The OneTouch LED shows which
scan setting will be used for scanning,
in this case scan setting 6.