Visioneer PATRIOT 430 - Manual (Page 30)

C ONFIGURING THE O NE T OUCH B UTTONS
25
C
ONFIGURING THE
O
NE
T
OUCH
B
UTTONS
When you first connect your scanner to a computer, the scanner’s software
configures each button with appropriate settings. Each OneTouch button
configuration consists of a Destination Application, a Scan
Configuration, and a Document Format. The OneTouch Properties
window is where you select these three elements for a button.
To open the OneTouch Properties window:
1.
Click the OneTouch icon. It is located in the Windows Notification
Area at the bottom right corner of the screen.
2. Right-click a button on the OneTouch Button Panel.
The OneTouch Properties window opens for that button.
The OneTouch Properties window also opens when you press, hold
down, and release the Simplex or Duplex button on the scanner.
Right-click on a button (for example, button 2)
and the Properties window opens for that button.
Note: Some of the options on the OneTouch Properties window (and
other OneTouch windows and dialog boxes) are “grayed out” and are not
available. Grayed out options are not appropriate for your Visioneer
Patriot 430 scanner.