Wayne-Dalton TORSION SPRING 9800 - Manual (Page 15)

Please Do Not Return This Product To The store. Call us Directly! Our trained technicians Will answer your questions and/or Ship any Parts
you May Need. you can reach us toll free at 1-888-827-3667 for Consumer assistance or online at www.wayne-dalton.com
15
tools Needed:
IN
sT
All
ATION
stacking sections
NOTE: for door section identification
see page 4.
NOTE: Make sure hinge leafs are
flipped down, when stacking another
section on top.
Place rollers in hinge tubes of the
second section (lock section).
With assistance, lift the second section
and guide rollers into the vertical
tracks.
keep sections vertically aligned and
fasten hinges to connect the sections
using 1/4”- 14 x 5/8” self tapping
screws.
Repeat for other section(s) except top
section.
IMPORTANT: END hINGES haVE (2)
SCREWS aND INtERMEDIatE hINGES
haVE (3) SCREWS.
NOTE: Install lock at this time (sold
separately). See instructions in
OPtIONal SIDElOCk INStallatION on
page 27.
6
Power Drill
7/16” Socket
Driver
(2) 1/4”-14 x 5/8”
SElf taPPING SCREWS
END hINGES (lEft haND ShOWN, RIGht hINGE SyMMEtRICally OPPOSItE)
INtERMEDIatE hINGES
(3) 1/4”-14 x 5/8” SElf taPPING
SCREWS
lOCk SECtION