White Rodgers 1F92W-51 - Manual (Page 41)

41
want to stop programming at any time, simply press
RUN
PRGM
to resume program operation.
1. Press SYSTEM
HEAT-OFF-COOL-AUTO
until HEAT is displayed.
2. Press VIEW
PRGM
once. 5 DAY (indicating weekday
program), and MOR, representing the morning
heating period, will appear in the display. Also
displayed are the currently programmed start
time for the MOR period and the currently pro-
grammed temperature.
EXAMPLE:
5 DAY
This display window shows that for the weekday
MOR period, the start time is 5:00 AM, and 64
°
is
the programmed temperature (this example re-
flects factory preprogramming).
3. To change the displayed start time to your se-
lected start time for weekday MOR heat pro-
gram, press TIME
FWD
or TIME
BACK
until your selected
time appears. The time will change in 15 minute
increments.
4. Press or until you reach your se-
lected weekday MOR heating temperature.
5. If you want the fan to run continuously during this
period, press FAN
ON – AUTO
until FAN is displayed.
6. Press VIEW
PRGM
. The currently programmed start
time and heating temperature for weekday DAY
will be displayed.
7. Repeat steps 3 through 5 to select the start time
and heating temperature for the weekday DAY
program.
8. Repeat steps 3 through 7 for the weekday EVE
and NHT heating programs.