White Rodgers 1F92W-51 - Manual (Page 43)

43
1. Press SYSTEM
HEAT-OFF-COOL-AUTO
until COOL is displayed.
2. Follow the procedure for entering your heating
program, using your selected cooling times and
temperatures.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat pro-
gramming one final time before beginning thermo-
stat operation.
1. Press SYSTEM
HEAT-OFF-COOL-AUTO
until HEAT is displayed.
2. Press and hold VIEW
PRGM
to view the heating period
times and temperatures in sequence for week-
day, then weekend MOR, DAY, EVE, and NHT
program periods.
3. Press RUN
PRGM
.
4. Press SYSTEM
HEAT-OFF-COOL-AUTO
until COOL is displayed.
5. Repeat step 2 to check cooling temperatures.
6. Press RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND EF-
FICIENCY!
Press SYSTEM
HEAT-OFF-COOL-AUTO
until OFF is displayed. Reattach
thermostat to subbase. Then press SYSTEM
HEAT-OFF-COOL-AUTO
to
select the operation mode you want (HEAT, COOL,
AUTO). Press FAN
ON – AUTO
until FAN is displayed
(automatic cycling).